DS938Z Panoramic Detector - Bosch Security

SKU:
DS938Z
Part #:
Model:
DET200DS938Z
Was: $275.00
Now: $169.95

Out of Stock

(No reviews yet) Write a Review
  • Free Shipping on Orders over $99

  • Out of Stock

Product Overview

The ceiling mount, 18 m (60 ft) panoramic PIR Detector use Motion Analyzer II processing to reduce false alarms. Several unique self-test features, including Motion Monitor, provide coverage integrity. Field replaceable mirrored optics allow them to be mounted on ceilings from 2.5 m to 6 m (8 ft to 18 ft) in height. Motion Analyzer II uses multiple thresholds and timing windows to analyze timing, amplitude, duration, and polarity of signals to make an alarm decision. It will not alarm on extreme levels of thermal and illumination disturbances caused by heaters and air conditioners, hot and cold drafts, sunlight, lightning, and moving headlights. Provides three sensitivity settings. PIR supervision provides trouble output in the event that PIR circuitry fails. Switch-selectable four or thirty day Motion Monitor supervision timers provide the detector with the ability to verify that there is a clear view of the protection area and that it has not been blocked. Three externally visible high output alarm LEDs visible from any angle, flash to indicate trouble condition. Internal noise voltage test pins provide precise pattern location and background disturbance evaluation using a standard analog meter.

Specifications

  • Additional Information
    Coverage is adjustable ±10° horizontally, +2° to -18° vertically.
  • Alarm/Siren
    Included
  • Application
    Commercial
  • Contact Rating
    28 VDC, 125 mA maximum
  • Contact Type
    NC
  • Current Draw
    18 mA at 12 VDC
  • Current Rating
    18 mA at 12 VDC
  • Device Type
    Passive infrared PIR sensor technology
  • Frequency
    No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at 50 V/m.
  • Function
    Provides PIR, 360 degrees x 18 m (60 ft) diameter coverage and 2.5 m to 6 m (8 ft to 18 ft) mounting height
  • Lights
    LED
  • Material
    High impact ABS plastic enclosure
  • Metric Size
    8.4cm x 13.3cm
  • Mounting Location
    Mounts directly to ceiling or to standard octagonal electrical box
  • Mounting Style
    Recommended Height 2.5 m to 6 m (8 ft to 18 ft)
  • Operating Temperature
    -20 to +120 degrees F (-29 to 49 degrees C)
  • Output Current
    Alarm: Form C reed relay at 3.0 W, 125 mA at 28 VDC for resistive loads
  • Power
    Hardwired
  • Range
    Up to 60' x 360°
  • Size
    3.3" x 5.25"
  • Standards
    ANSR: Intrusion Detection Units (UL639)
  • Type
    Passive Infrared (PIR)
  • Unit of Measure
    Each
  • Voltage
    6 VDC to 15 VDC