Nortek Control MCS109950 Gate Receiver, Gray

Part #:
Was: $86.90
Now: $67.13

(No reviews yet) Write a Review
  • Free Shipping on Orders over $99

Adding to cart… The item has been added
California Prop 65 Warning

Product Overview

The MCS109950 is a 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver. The MCS109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters. The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator�s radio activation terminals. The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.

Warranty Information

1 Year Limited


  • Application
    For Automatic Gate Operators/Systems where a Remote Antenna is Needed
  • Color
  • Communication
    RF frequency: 300 MHz or 310 MHz (jumper selectable)
  • Depth
  • Device Length
    11" Wire Whip Antenna
  • Device Type
    Dual Frequency Receiver
  • Height
  • Includes
    3-foot, 2-conductor wire lead with spade lugs, 11 in. wire whip antenna
  • Operating Temperature
    -4-140 deg F
  • Operating Voltage
    12-24 volts AC or DC
  • Power
  • Programmer/
    10-position coding switch
  • Relay
    The normally open relay output can switch up to 1 amp @ 30 VAC
  • Standards
    FCC Part 15
  • Unit of Measure
  • Use With
    Multi-Code and Stanley transmitters only
  • Weight
    0.7 lb
  • Width